Secondary Chamber Temperature * 1100 — 1300 deg. C
Dimensional Sketch, Operation & Installation Manuals. Required
Away — Gas System Required
Thickness 25 ” minimum
Delivery Karachi Sea Port – Pakistan
The details of Components of incinerator is as follows:
System Status & Alarms Required for all vital parameters.
Media Slightly acidic
Heat Insulation Required for indoor installation
1: Main Controlled Air
Chambers * Dual Chamber.
Life Span * 10 — 15 years.
Insulation Material Ceramic Fiber
Installation Requirements. As low as possible. Almost Plug & Play type.
Main chamber — Consists of a monolithic high grade refractory concrete with high grade insulation backing,. Utilising a refractory hearth or equivalent for continuous ash removal.
Secondary Chamber — Consists of high density, low thermal mass refractory ceramic fiber with an innovative low emissivity protective coating.
Temperature Control to Primary & Secondary Chambers Required
Ingredients to be burnt Cotton, Rubber, PVC Sheets, PE Gloves, Oil, Plastic Bottles, Paper etc..
Feeding & Ash Removing System Air Tight ventilating locked doors ( Feeding from Top will be preferred)
Rating Temperature 1600 — 1800 deg. C
Secondary Chamber Temperature * 1100 – 1300 deg. C
Heating Source Natural Gas + Propane or Fuel Oil as an additional source
Off – Gas Residence Time 2 Seconds.
Refractory Material Material * Alumina ( 56 – 80 % Pure )
Lining * SS 316L
Life Span * 10 – 15 years.
Rating Temperature 1600 – 1800 deg. C
Media Slightly acidic
Insulation Material Ceramic Fiber
Thickness 25 “ minimum
Feeding & Ash Removing System Air Tight ventilating locked doors ( Feeding from Top will be preferred)
Spares Required for 5 Years trouble free operation
